ELECTRIC EVENT TIMER

(1 Channel)

ELECTRIC:

+12V input RED WIRE

GND BLACK WIRE

START GREEN WIRE

DELAYED OUTPUT BLUE WIRE

Output can source 4A @ 12V

OPERATION: When 12V is applied to the START input (Green Wire) the output will delay X sec. The output can be configured to be normally hi (12V) or normally low (0V)

8 PIN SWITCH

Add up the dip switch values to get the delay value.

Dip Sw on	Time
1	128
2	64
3	32
4	16
5	8
6	4
7	2
8	1

4 PIN SWITCH

Sw 1 Down Timer span is 0 – 2.56 sec in 0.01 sec increments

Sw 1 Up Timer span is 0 – 25.6 sec in 0.1 sec increments

Sw 2 Down Output is normally ON (12V), output switches OFF when timer elapses.

Sw 2 Up Output is normally OFF (0V), output switches ON when timer elapses.

Sw 3 Down Output will reset when the input is removed. Timer will start over.

Sw 3 Up Output will reset 15 sec after timer elapses.

Power must be cycled after making a mode change .