POWER MODULE ( dual battery )
THIS IS A NON-FUSED POWER SUPPLY
CARE SHOULD BE TAKEN TO NEVER SHORT OUTPUT!
Any Position OK
4 * 10-32 = 2.300 * 3.500 inch centers
Screws should not protrude into box more than 3/8 of an inch.
½ to 1hr a day for most cases
Or when power light is red or yellow
For maximum battery life, battery should be drained to 0 volts every
month and recharged to full.
Green Over 12.5 volts
Yellow 10.0 to 12.5 volts
Red 1.0 to 10 volts
DUAL POWER SWITCHES
Each switch turns on one battery pack
Both switches should be on during normal operation
Each battery pack may be checked by turning on switches one at a time.
If one is low before run, that switch should be left in the off position