· Bolt in replacement of our existing Single or Dual Start 15 channel timers. (Not upgradeable)
· 3 modes of operation.
Click Here for Programming instructions Single Start Mode (A-Fuel) Click Here for the Hookup Diagram
Click Here for Programming instructions Dual Start Mode (Alcohol) Click Here for the Hookup Diagram
·
Timer Mode - Each channel of the timer can be programmed to
turn on at a specific time and off at a specific
time.
(Same
as our existing 15 channel timer.)
·
(NEW) RPM Mode
- Each channel can be programmed to act as an RPM activated output that is
active all the time.
RPM
channels can also be programmed to be active based on the on and off times for
that channel.
2
different RPM setpoints are available.
·
(NEW) Pressure Mode - Each channel can be programmed to act as an Pressure activated output
that is active all the time.
Pressure
channels can also be programmed to be active based on the on and off time for
that channel.
2 different Pressure setpoints are available.
Power IN: (Same
as our Existing 15 channel Timer)
2 pin plug..red-blk wires
9-16 volt input
Start Switch conn:
(Same as our Existing 15 channel Timer)
Single or Dual Start
Outputs: 22 pin conn: (Same as our Existing 15 channel Timer)
|
R |
B |
1 |
B |
7 |
8 |
9 |
A |
B |
R |
B |
|
2 |
3 |
4 |
5 |
|
R |
6 |
F |
E |
D |
C |
|
|
|
|
|
|
|
|
|
|
|
|
Red=Pos
Black=Neg
Mounting: (Same
as our Existing 15 channel Timer)
10-32 screws—2.500” by2.000”
Overall Dims: 4.550” * 3.500” * 1.750”